Henry-Hiles/qmk_userspace
1
0
Fork 0
forked from mirrors/qmk_userspace
Code Pull requests Activity

Merge commit '60b30c0363' as 'lib/lufa'

Browse source
This commit is contained in:
Jack Humbert 2017-07-07 11:55:23 -04:00
commit 8655d4f494
1455 changed files with 394541 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

250
lib/lufa/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.c Normal file
View file

@ -0,0 +1,250 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2017.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the AudioOutputHost demo. This file contains the main tasks of
* the demo and is responsible for the initial application hardware configuration.
*/
#include "AudioOutputHost.h"
/** Main program entry point. This routine configures the hardware required by the application, then
* enters a loop to run the application tasks in sequence.
*/
int main(void)
{
SetupHardware();
puts_P(PSTR(ESC_FG_CYAN "Audio Output Host Demo running.\r\n" ESC_FG_WHITE));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
GlobalInterruptEnable();
for (;;)
{
USB_USBTask();
}
}
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#endif
/* Hardware Initialization */
Serial_Init(9600, false);
Buttons_Init();
ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
ADC_SetupChannel(MIC_IN_ADC_CHANNEL);
LEDs_Init();
USB_Init();
/* Create a stdio stream for the serial port for stdin and stdout */
Serial_CreateStream(NULL);
/* Start the ADC conversion in free running mode */
ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_GET_CHANNEL_MASK(MIC_IN_ADC_CHANNEL));
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
* starts the library USB task to begin the enumeration and USB management process.
*/
void EVENT_USB_Host_DeviceAttached(void)
{
puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
* stops the library USB task management process.
*/
void EVENT_USB_Host_DeviceUnattached(void)
{
puts_P(PSTR(ESC_FG_GREEN "Device Unattached.\r\n" ESC_FG_WHITE));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
* enumerated by the host and is now ready to be used by the application.
*/
void EVENT_USB_Host_DeviceEnumerationComplete(void)
{
puts_P(PSTR("Getting Config Data.\r\n"));
uint8_t ErrorCode;
/* Get and process the configuration descriptor data */
if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
{
if (ErrorCode == ControlError)
puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
else
puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
return;
}
/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
{
printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
return;
}
if ((ErrorCode = USB_Host_SetInterfaceAltSetting(StreamingInterfaceIndex,
StreamingInterfaceAltSetting)) != HOST_SENDCONTROL_Successful)
{
printf_P(PSTR(ESC_FG_RED "Could not set alternative streaming interface setting.\r\n"
" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_Host_SetDeviceConfiguration(0);
return;
}
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_ENDPOINT),
.bRequest = AUDIO_REQ_SetCurrent,
.wValue = (AUDIO_EPCONTROL_SamplingFreq << 8),
.wIndex = StreamingEndpointAddress,
.wLength = sizeof(USB_Audio_SampleFreq_t),
};
USB_Audio_SampleFreq_t SampleRate = AUDIO_SAMPLE_FREQ(48000);
/* Select the control pipe for the request transfer */
Pipe_SelectPipe(PIPE_CONTROLPIPE);
/* Set the sample rate on the streaming interface endpoint */
if ((ErrorCode = USB_Host_SendControlRequest(&SampleRate)) != HOST_SENDCONTROL_Successful)
{
printf_P(PSTR(ESC_FG_RED "Could not set requested Audio sample rate.\r\n"
" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_Host_SetDeviceConfiguration(0);
return;
}
/* Sample reload timer initialization */
TIMSK0 = (1 << OCIE0A);
OCR0A = ((F_CPU / 8 / 48000) - 1);
TCCR0A = (1 << WGM01); // CTC mode
TCCR0B = (1 << CS01); // Fcpu/8 speed
puts_P(PSTR("Speaker Enumerated.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
{
USB_Disable();
printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
" -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
for(;;);
}
/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
const uint8_t SubErrorCode)
{
printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
" -- Error Code %d\r\n"
" -- Sub Error Code %d\r\n"
" -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
/** ISR to handle the reloading of the endpoint with the next sample. */
ISR(TIMER0_COMPA_vect, ISR_BLOCK)
{
uint8_t PrevPipe = Pipe_GetCurrentPipe();
Pipe_SelectPipe(AUDIO_DATA_OUT_PIPE);
Pipe_Unfreeze();
/* Check if the current pipe can be written to (device ready for more data) */
if (Pipe_IsOUTReady())
{
int16_t AudioSample;
#if defined(USE_TEST_TONE)
static uint8_t SquareWaveSampleCount;
static int16_t CurrentWaveValue;
/* In test tone mode, generate a square wave at 1/256 of the sample rate */
if (SquareWaveSampleCount++ == 0xFF)
CurrentWaveValue ^= 0x8000;
/* Only generate audio if the board button is being pressed */
AudioSample = (Buttons_GetStatus() & BUTTONS_BUTTON1) ? CurrentWaveValue : 0;
#else
/* Audio sample is ADC value scaled to fit the entire range */
AudioSample = ((SAMPLE_MAX_RANGE / ADC_MAX_RANGE) * ADC_GetResult());
#if defined(MICROPHONE_BIASED_TO_HALF_RAIL)
/* Microphone is biased to half rail voltage, subtract the bias from the sample value */
AudioSample -= (SAMPLE_MAX_RANGE / 2);
#endif
#endif
Pipe_Write_16_LE(AudioSample);
Pipe_Write_16_LE(AudioSample);
if (!(Pipe_IsReadWriteAllowed()))
Pipe_ClearOUT();
}
Pipe_Freeze();
Pipe_SelectPipe(PrevPipe);
}

88
lib/lufa/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.h Normal file
View file

@ -0,0 +1,88 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2017.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for AudioOutputHost.c.
*/
#ifndef _AUDIO_OUTPUT_HOST_H_
#define _AUDIO_OUTPUT_HOST_H_
/* Includes: */
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/pgmspace.h>
#include <avr/power.h>
#include <avr/interrupt.h>
#include <stdio.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Drivers/Peripheral/ADC.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
#include <LUFA/Platform/Platform.h>
#include "ConfigDescriptor.h"
#include "Config/AppConfig.h"
/* Macros: */
/** Maximum audio sample value for the microphone input. */
#define SAMPLE_MAX_RANGE 0xFFFF
/** Maximum ADC range for the microphone input. */
#define ADC_MAX_RANGE 0x3FF
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
#define LEDMASK_USB_NOTREADY LEDS_LED1
/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
#define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
#define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
/* Function Prototypes: */
void SetupHardware(void);
void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
void EVENT_USB_Host_DeviceAttached(void);
void EVENT_USB_Host_DeviceUnattached(void);
void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
const uint8_t SubErrorCode);
void EVENT_USB_Host_DeviceEnumerationComplete(void);
#endif

83
lib/lufa/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt Normal file
View file

@ -0,0 +1,83 @@
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Audio Output Host Demo
*
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
* \li Series 7 USB AVRs (AT90USBxxx7)
*
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Host</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Audio Class</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>Standard Audio Device</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF Audio 1.0 Class Specification \n
* USBIF Audio 1.0 Class Terminal Types Specification \n
* USBIF Audio 1.0 Data Formats Specification</td>
* </tr>
* <tr>
* <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
*
* \section Sec_Description Project Description:
*
* Audio Output host demonstration application. This gives a simple reference
* application for implementing a USB Audio host, for USB Audio devices using
* the USB Audio 1.0 class profile.
*
* By default, the demo will produce a square wave test tone when the board
* button is pressed. If USE_TEST_TONE is not defined in the project makefile,
* incoming audio from the ADC channel 1 will be sampled and sent to the attached
* USB audio device instead.
*
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <th><b>Define Name:</b></th>
* <th><b>Location:</b></th>
* <th><b>Description:</b></th>
* </tr>
* <tr>
* <td>MIC_IN_ADC_CHANNEL</td>
* <td>AppConfig.h</td>
* <td>Sets the ADC channel used by the demo for the input audio samples from an attached microphone.</td>
* </tr>
* <tr>
* <td>USE_TEST_TONE</td>
* <td>AppConfig.h</td>
* <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
* instead of sampling the board microphone.</td>
* </tr>
* <tr>
* <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
* <td>AppConfig.h</td>
* <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
* </tr>
* </table>
*/

51
lib/lufa/Demos/Host/LowLevel/AudioOutputHost/Config/AppConfig.h Normal file
View file

@ -0,0 +1,51 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2017.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
* \brief Application Configuration Header File
*
* This is a header file which is be used to configure some of
* the application's compile time options, as an alternative to
* specifying the compile time constants supplied through a
* makefile or build system.
*
* For information on what each token does, refer to the
* \ref Sec_Options section of the application documentation.
*/
#ifndef _APP_CONFIG_H_
#define _APP_CONFIG_H_
#define MIC_IN_ADC_CHANNEL 2
#define MICROPHONE_BIASED_TO_HALF_RAIL
#define USE_TEST_TONE
#endif

93
lib/lufa/Demos/Host/LowLevel/AudioOutputHost/Config/LUFAConfig.h Normal file
View file

@ -0,0 +1,93 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2017.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
* \brief LUFA Library Configuration Header File
*
* This header file is used to configure LUFA's compile time options,
* as an alternative to the compile time constants supplied through
* a makefile.
*
* For information on what each token does, refer to the LUFA
* manual section "Summary of Compile Tokens".
*/
#ifndef _LUFA_CONFIG_H_
#define _LUFA_CONFIG_H_
#if (ARCH == ARCH_AVR8)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
// #define ORDERED_EP_CONFIG
#define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
// #define USB_DEVICE_ONLY
#define USB_HOST_ONLY
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
// #define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
// #define CONTROL_ONLY_DEVICE
// #define INTERRUPT_CONTROL_ENDPOINT
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
/* USB Host Mode Driver Related Tokens: */
// #define HOST_STATE_AS_GPIOR {Insert Value Here}
// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#else
#error Unsupported architecture for this LUFA configuration file.
#endif
#endif

220
lib/lufa/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.c Normal file
View file

@ -0,0 +1,220 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2017.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
* needed to communication with an attached USB device. Descriptors are special computer-readable structures
* which the host requests upon device enumeration, to determine the device's capabilities and functions.
*/
#include "ConfigDescriptor.h"
/** Index of the currently used Audio Streaming Interface within the device. */
uint8_t StreamingInterfaceIndex = 0;
/** Alternative Setting of the currently used Audio Streaming Interface within the device. */
uint8_t StreamingInterfaceAltSetting = 0;
/** Address of the streaming audio endpoint currently in use within the device. */
uint8_t StreamingEndpointAddress = 0;
/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
* routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
* with compatible devices.
*
* This routine searches for a Streaming Audio interface descriptor containing a valid Isochronous audio endpoint.
*
* \return An error code from the \ref AudioHost_GetConfigDescriptorDataCodes_t enum.
*/
uint8_t ProcessConfigurationDescriptor(void)
{
uint8_t ConfigDescriptorData[512];
void* CurrConfigLocation = ConfigDescriptorData;
uint16_t CurrConfigBytesRem;
USB_Descriptor_Interface_t* AudioControlInterface = NULL;
USB_Descriptor_Interface_t* AudioStreamingInterface = NULL;
USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL;
/* Retrieve the entire configuration descriptor into the allocated buffer */
switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
{
case HOST_GETCONFIG_Successful:
break;
case HOST_GETCONFIG_InvalidData:
return InvalidConfigDataReturned;
case HOST_GETCONFIG_BuffOverflow:
return DescriptorTooLarge;
default:
return ControlError;
}
while (!(DataOUTEndpoint))
{
/* See if we've found a likely compatible interface, and if there is an endpoint within that interface */
if (!(AudioControlInterface) ||
USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
DComp_NextAudioInterfaceDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
{
/* Check if we haven't found an Audio Control interface yet, or if we have run out of related Audio Streaming interfaces */
if (!(AudioControlInterface) ||
USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
DComp_NextAudioStreamInterface) != DESCRIPTOR_SEARCH_COMP_Found)
{
/* Find a new Audio Control interface if the current one doesn't contain a compatible streaming interface */
if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
DComp_NextAudioControlInterface) != DESCRIPTOR_SEARCH_COMP_Found)
{
/* Descriptor not found, error out */
return NoCompatibleInterfaceFound;
}
/* Save the interface in case we need to refer back to it later */
AudioControlInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);
/* Find the next Audio Streaming interface within that Audio Control interface */
if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
DComp_NextAudioStreamInterface) != DESCRIPTOR_SEARCH_COMP_Found)
{
/* Descriptor not found, error out */
return NoCompatibleInterfaceFound;
}
}
/* Save the interface in case we need to refer back to it later */
AudioStreamingInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);
/* Skip the remainder of the loop as we have not found an endpoint yet */
continue;
}
/* Retrieve the endpoint address from the endpoint descriptor */
USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
/* Save the endpoint if it is an OUT type endpoint */
if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_OUT)
DataOUTEndpoint = EndpointData;
}
StreamingInterfaceIndex = AudioStreamingInterface->InterfaceNumber;
StreamingInterfaceAltSetting = AudioStreamingInterface->AlternateSetting;
StreamingEndpointAddress = DataOUTEndpoint->EndpointAddress;
/* Configure the Audio data OUT pipe */
Pipe_ConfigurePipe(AUDIO_DATA_OUT_PIPE, EP_TYPE_ISOCHRONOUS, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 2);
/* Valid data found, return success */
return SuccessfulConfigRead;
}
/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
* configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
* descriptor processing if an incompatible descriptor configuration is found.
*
* This comparator searches for the next Interface descriptor of the correct Audio Control Class, Subclass and Protocol values.
*
* \return A value from the DSEARCH_Return_ErrorCodes_t enum
*/
uint8_t DComp_NextAudioControlInterface(void* CurrentDescriptor)
{
USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
if (Header->Type == DTYPE_Interface)
{
USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
if ((Interface->Class == AUDIO_CSCP_AudioClass) &&
(Interface->SubClass == AUDIO_CSCP_ControlSubclass) &&
(Interface->Protocol == AUDIO_CSCP_ControlProtocol))
{
return DESCRIPTOR_SEARCH_Found;
}
}
return DESCRIPTOR_SEARCH_NotFound;
}
/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
* configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
* descriptor processing if an incompatible descriptor configuration is found.
*
* This comparator searches for the next Interface descriptor of the correct Audio Streaming Class, Subclass and Protocol values.
*
* \return A value from the DSEARCH_Return_ErrorCodes_t enum
*/
uint8_t DComp_NextAudioStreamInterface(void* CurrentDescriptor)
{
USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
if (Header->Type == DTYPE_Interface)
{
USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
if ((Interface->Class == AUDIO_CSCP_AudioClass) &&
(Interface->SubClass == AUDIO_CSCP_AudioStreamingSubclass) &&
(Interface->Protocol == AUDIO_CSCP_StreamingProtocol))
{
return DESCRIPTOR_SEARCH_Found;
}
}
return DESCRIPTOR_SEARCH_NotFound;
}
/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
* configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
* descriptor processing if an incompatible descriptor configuration is found.
*
* This comparator searches for the next Isochronous Endpoint descriptor within the current interface, aborting the
* search if another interface descriptor is found before the next endpoint.
*
* \return A value from the DSEARCH_Return_ErrorCodes_t enum
*/
uint8_t DComp_NextAudioInterfaceDataEndpoint(void* CurrentDescriptor)
{
USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
if (Header->Type == DTYPE_Endpoint)
{
USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);
if ((Endpoint->Attributes & EP_TYPE_MASK) == EP_TYPE_ISOCHRONOUS)
return DESCRIPTOR_SEARCH_Found;
}
else if (Header->Type == DTYPE_Interface)
{
return DESCRIPTOR_SEARCH_Fail;
}
return DESCRIPTOR_SEARCH_NotFound;
}

73
lib/lufa/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h Normal file
View file

@ -0,0 +1,73 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2017.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for ConfigDescriptor.c.
*/
#ifndef _CONFIGDESCRIPTOR_H_
#define _CONFIGDESCRIPTOR_H_
/* Includes: */
#include <LUFA/Drivers/USB/USB.h>
#include "AudioOutputHost.h"
#include "Config/AppConfig.h"
/* Macros: */
/** Pipe address for the Audio data OUT pipe. */
#define AUDIO_DATA_OUT_PIPE (PIPE_DIR_OUT | 1)
/* Enums: */
/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
enum AudioHost_GetConfigDescriptorDataCodes_t
{
SuccessfulConfigRead = 0, /**< Configuration Descriptor was processed successfully */
ControlError = 1, /**< A control request to the device failed to complete successfully */
DescriptorTooLarge = 2, /**< The device's Configuration Descriptor is too large to process */
InvalidConfigDataReturned = 3, /**< The device returned an invalid Configuration Descriptor */
NoCompatibleInterfaceFound = 4, /**< A compatible interface with the required endpoints was not found */
};
/* External Variables: */
extern uint8_t StreamingInterfaceIndex;
extern uint8_t StreamingInterfaceAltSetting;
extern uint8_t StreamingEndpointAddress;
/* Function Prototypes: */
uint8_t ProcessConfigurationDescriptor(void);
uint8_t DComp_NextAudioControlInterface(void* CurrentDescriptor);
uint8_t DComp_NextAudioStreamInterface(void* CurrentDescriptor);
uint8_t DComp_NextAudioInterfaceDataEndpoint(void* CurrentDescriptor);
#endif

54
lib/lufa/Demos/Host/LowLevel/AudioOutputHost/asf.xml Normal file
View file

@ -0,0 +1,54 @@
<asf xmlversion="1.0">
<project caption="Audio Output Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.audio_output.example.avr8">
<require idref="lufa.demos.host.lowlevel.audio_output"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<module type="application" id="lufa.demos.host.lowlevel.audio_output" caption="Audio Output Host Demo (Low Level APIs)">
<info type="description" value="summary">
Audio Output Host demo, implementing a basic USB audio source that can output audio data to an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
</info>
<info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology">
<keyword value="Low Level APIs"/>
<keyword value="USB Host"/>
<keyword value="Audio Class"/>
</info>
<device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/>
<build type="distribute" subtype="user-file" value="doxyfile"/>
<build type="distribute" subtype="user-file" value="AudioOutputHost.txt"/>
<build type="c-source" value="AudioOutputHost.c"/>
<build type="c-source" value="ConfigDescriptor.c"/>
<build type="header-file" value="AudioOutputHost.h"/>
<build type="header-file" value="ConfigDescriptor.h"/>
<build type="module-config" subtype="path" value="Config"/>
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
<build type="header-file" value="Config/AppConfig.h"/>
<build type="header-file" value="Config/LUFAConfig.h"/>
<require idref="lufa.common"/>
<require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.peripheral.usart"/>
<require idref="lufa.drivers.peripheral.adc"/>
<require idref="lufa.drivers.misc.ansi"/>
<require idref="lufa.drivers.board"/>
<require idref="lufa.drivers.board.leds"/>
<require idref="lufa.drivers.board.buttons"/>
</module>
</asf>

2395
lib/lufa/Demos/Host/LowLevel/AudioOutputHost/doxyfile Normal file
View file

File diff suppressed because it is too large Load diff

43
lib/lufa/Demos/Host/LowLevel/AudioOutputHost/makefile Normal file
View file

@ -0,0 +1,43 @@
#
# LUFA Library
# Copyright (C) Dean Camera, 2017.
#
# dean [at] fourwalledcubicle [dot] com
# www.lufa-lib.org
#
# --------------------------------------
# LUFA Project Makefile.
# --------------------------------------
# Run "make help" for target help.
MCU = at90usb1287
ARCH = AVR8
BOARD = USBKEY
F_CPU = 8000000
F_USB = $(F_CPU)
OPTIMIZATION = s
TARGET = AudioOutputHost
SRC = $(TARGET).c ConfigDescriptor.c $(LUFA_SRC_USB) $(LUFA_SRC_SERIAL)
LUFA_PATH = ../../../../LUFA
CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/
LD_FLAGS =
# Default target
all:
# Include LUFA-specific DMBS extension modules
DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
include $(DMBS_LUFA_PATH)/lufa-sources.mk
include $(DMBS_LUFA_PATH)/lufa-gcc.mk
# Include common DMBS build system modules
DMBS_PATH ?= $(LUFA_PATH)/Build/DMBS/DMBS
include $(DMBS_PATH)/core.mk
include $(DMBS_PATH)/cppcheck.mk
include $(DMBS_PATH)/doxygen.mk
include $(DMBS_PATH)/dfu.mk
include $(DMBS_PATH)/gcc.mk
include $(DMBS_PATH)/hid.mk
include $(DMBS_PATH)/avrdude.mk
include $(DMBS_PATH)/atprogram.mk