* Initial commit
* testing modes
* working on puckbuddy firmware. This is all working for now but need to clean it up and personalize it.
* needs to be updated from vial build
* prepping for PR
* added rgb mode cycling to fn1 since it isn't on the encoder for these maps
* readme written in preparation for pr
* reverting driver print line
* Removed old reference to OBE in the readme from copypaste error
* applying changes based on review
* applying changes from review
* Update keyboards/mechwild/puckbuddy/puckbuddy.c
* trailing whitespaces removed
* added clear screen condition for switching back to name rendering
* Added uf2 keymap and fixed display glitch for the logo render art.
* Removed extra definition of FEE_PAGE_BASE_ADDRESS
* Removed the uf2 keymap and made it automatic when selecting bootloader instead
* Fixed the bad bootloader check
* moved the uf2 check from rules.mk to post_rules.mk to satisfy lint
* changing it back to stm32-dfu bootloader default
* Fixed RGBLIGHT enable oversight.
* Added persistent dynamic tapping configuration for the cirque touchpad tap term
* new lines at end of files for formatting and diff sanity
* changing default bootloader back to stm32-dfu
* Had to completely redefine the tap keycodes instead of using the DT_UP and DT_DOWN keycodes because I was not able to specify them easily in the via/vial configs and this allows me to keep the original functionality instead of tying it to eeprom like these are.
* Added tap toggling keycodes to quick enable and disable the tapping term
* working out an issue where the tap status keeps turning to off on power cycle
* correcting submodule garbo
* Fixed display issue and rewrote TAP config approach to make it a little easier to control
* removing backup puckbuddy.c code
* Added some comment, removed some commented out old code, removed trailing whitespace
* Changed to handle tinyuf2 by expecting emulated eeprom so that adding other forms of eeprom can be handled for the memory offset separately, and added user oled conditional inside the keyboard oled code block
* Updated default keymaps to have the tap and dpi keys on by default
* Apply suggestions from code review
* Apply suggestions from code review
* skergo.h: use ___ for KC_NO
* skergo.h: use 3-character notation
* skergo.h: add matrix diagram
* add LAYOUT_all macro
* update grid alignment of LAYOUT macro and keymaps
* refactor keymaps
Refactor keymaps to use the `LAYOUT_all` macro. Converts tabs to spaces.
This change necessitates the following changes to keymaps:
- The keycodes for Page Up, Page Down, and End each move up one row - all as the last keys on their new rows.
- The keycode for the secondary B key moves up one row, inserted between the primary (left side) B and the N.
* remove LAYOUT macro
* rename LAYOUT_all macro to LAYOUT_split_bs
* add LAYOUT_2u_bs macro
* readme.md: add flashing example
* info.json: correct maintainer value
Update to reference maintainer's GitHub username.
* kbdfans/bounce/75/hotswap: keymap readability fix
Update grid alignment to disambiguate which keycodes correspond in different layers.
----
Layer 0 had 13 and 9 keycodes on the bottom two rows respectively, while Layers 1-3 had 14 and 8.
* kbdfans/bounce/75/soldered: keymap readability fix
Update grid alignment to disambiguate which keycodes correspond in different layers.
----
Layer 0 had 14 and 9 keycodes on the bottom two rows respectively, while Layers 1-3 had 15 and 8.
* kbdfans/bounce/75/soldered: fix layer index in keymaps
Layer indexes were 0,1,2,1 instead of 0,1,2,3.
* skjoldr.h: use ___ for KC_NO
* skjoldr.h: use K<row><column> notation
Matrix was previously defined using identifiers in the format of K<column><row>.
* skjoldr.h: add matrix diagram
* info.json: apply friendly formatting
- key legends as labels
- correct key sizes and positioning
* refactor keymaps
Refactors the `default` and `via` keymaps.
- use QMK-native keycode aliases
- grid-align keycodes for readability
* rename LAYOUT macro to LAYOUT_60_ansi_arrow
* enable Community Layout support
* info.json: correct maintainer value
Field is meant to reference the maintainer's GitHub username.
* sinanju.h: add matrix diagram
* add LAYOUT_60_ansi_wkl_split_bs_rshift macro
Same matrix as `LAYOUT_all`, but with position K2D (right half of split Backspace) moved to the end of the top row.
* refactor keymaps
- use `LAYOUT_60_ansi_wkl_split_bs_rshift` macro instead of `LAYOUT_all`
- polish four-space indent
- update grid alignment
- replace `RESET` keycode with `QK_BOOT`
* remove now-unused LAYOUT_all macro
* add LAYOUT_60_ansi_wkl macro with keymap
Add a layout with 2u Backspace and 2.75u right Shift.
* info.json: correct maintainer value
* Initial Apollo87H support
* Define RGB animations and default animation
* Add proper per-key RGB support
* Adjust LED positions
* Separate delta-gamma
* Fine-tune LED positions
* fix up GAMMA revision
* fix up tabs indentation to spaces indentation
* Fixed positioning and CS-SW defs for some LEDs
* Fix INS RGB position
* Fine-tune LED positions, fix default RGB
* Update readme's
* Rename LAYOUT_87H to lowercase 87h
* Formatting gamma's rules.mk
* Formatting delta's rules.mk
* Use smaller readme image
* Use smaller README image
* First support for 87H-T-SC and 88H-T-SC
* Update README
* Fix layout naming
* Remove
* Remove EEPROM definitions, fix missing RGB LED mod/alpha definer
* Add suggestions from noroadsleft
* chiffre refactor for new revisions
* updated led matrix config
* updated per suggestions
* add tapdance enable
* revert tapdance (none defined in the default keymaps)
* clean up rules
* add readme for HE
* remove notes in readme
* fix perm
* fix perms
* Fix spacing on readme
* fix perm
* fix perms again?
* added files for EVO70
* updated info.json and readme
* ran qmk lint and fixed typo in info.json
* removed defines from config.h in favor of info.json
* removed an unnecssary include
* removed unnecessary code
* updated rules.mk to remove mention of Bluetooth
* corrected edit to rules.mk
* added code for OLED menu display
* removed extraneous comments and spaces
* added bongo cat animation
* Update keyboards/custommk/evo70/rules.mk
* Update keyboards/custommk/evo70/config.h
* Modified Bongocat graphics to match original proportions
* updated info.json device version
* updated OLED splash screen display timing
* improved bongo cat tap detection and added backlight breathing to OLED menu
* various improvements to OLED, saving settings, and VIA keymap fix
* removed extraneous define
* custom encoder assignment retained upon powerup, backlight sleep upon suspend
* corrected bongo cat tap detection
* Changed splash screen and bongo cat encoder rotation to use the custom assignments
* removed _default from LAYOUT naming and changed keyboard image to be hosted from imgur
* Force smaller version of image to be used in readme
